Microdermabrasion vs Chemical Peel
When was the last time you peeled an apple? Remember how the thin layers cam off and a nice delicate apple was more than ready to please your taste buds. Microdermabrasion and Chemical peel are not much different. They both exfoliate the skin to remove the dead skin and reveal younger, refreshing skin. Albeit, the two are not the same. Wonder how? Have a read!
If you’ve had enough of your busy schedule and want to indulge in a treatment that leaves a salon-soft skin, choose from the two treatments that we will be discussing today – Microdermabrasion vs Chemical Peel. Not only that, we shall be talking about the pros and cons of both to help you choose better for a filterless selfie!
The Main Difference between Microdermabrasion and Chemical Peel
Wondering what microdermabrasion is? Sit back and relax. We are always ready to share the beauty mantras!
Microdermabrasion is carried by a certified aesthetician at a salon. The main focus is to remove the dead skin cells on the surface of the skin. It is done with the help of a wand which applies pressure that removes gunk and dirt from the skin. It improves the texture, fights off acne, and leaves a glowy complexion. Microdermabrasion is carried out in two ways using aluminium oxide crystal or the one with a diamond tip that uses sand.
A chemical peel is applied in the form of a solution on top of the skin. It exfoliates the skin and boosts the production of collagen, which helps fight pigmentation, acne, wrinkles, and fine lines.
The acids used in the peel penetrate deep into the tissues and pull the dirt and dead skin right on the surface.
After the treatment, you might experience peeled off and flaky skin which majorly depends on your skin type and sensitivity level.
How often can you do these Treatments?
Usually, the practitioners advise monthly treatments for deep exfoliation. Women with severe acne should go for two treatments per month. You will see a great difference in the texture by allowing the creams and serums to absorb for deep restoration of skin cells.
However, microdermabrasion can also be carried at home. How? Let me explain.
Microdermabrasion at home is a simple and effective way to get the desired skin texture within 30 minutes! With Mello’s Microdermabrasion System, you can rid of blackheads and diminish the appearance of fine lines and wrinkles. It helps rejuvenate the skin with the adjustable suction suitable for all skin types! It is legit the best microdermabrasion machine, try it yourself NOW!
Not only it is way cheaper than produce at a salon; it is as effective.
While microdermabrasion can be carried out every now and then, chemical peels shouldn’t be done too often since these peels can be a bit harsh. They also require specific aftercare during the first week, which makes the process all the more demanding.
Also, chemical peels should never be tried at home as you might leave some permanent marks on your skin.
To know more about Microdermabrasion at home, read along!
The Verdict – Microdermabrasion vs Chemical Peel
Now that we know about both treatments, here a more detailed difference between the two so that you can choose better!
#1. How is the Procedure Carried Out?
While microdermabrasion is done with a wand, a chemical peel is applied with the hands.
The chemical peels vary in intensity and can be distinguished as super mild, medium or strong. On the other hand, microdermabrasion can’t be adjusted.
#2. How painful can the Procedure be?
How the procedures are carried out depends on your aesthetician’s experience and knowledge. Therefore the treatments should not be too irritating and painful if you go to a reputed place.
Most chemical peels are unpleasant since they are harsh on the skin. The pain can be relieved using mild massaging movements or even anesthesia.
When it comes to Microdermabrasion, you will get a tingling sensation not as bad as a chemical procedure. In both cases, you might notice your skin turn red which is not a thing to worry about.
#3. How Long does it take to Recover?
Microdermabrasion can leave your skin red and inflamed, but that is how far it goes! Meaning your skin will feel the difference in just a couple pf jours. You just have to be cautious for a maximum of 2 days and take care of your skin and avoid exposure to the sun without sunscreen.
On the other hand, chemical peels are a lot heftier. The treatments hurt more than the recovery itself and can leave your skin pigmented and dry. It takes around a week for the effects to subside and you will have to be very careful while stepping out.
#4. How much does Microdermabrasion and Chemical Peel cost?
It depends on the place and the quality of the salon. Chemical peels give you a result for two months and therefore are more expensive and long-lasting. The price range can cost from $100-$400.
While microdermabrasion is also a temporary solution for a healthy glow, it costs little than the chemical procedure. It is even better with a microdermabrasion machine!
#5. What to Expect After the Procedure?
After microdermabrasion or chemical peel treatment, make sure you do not step directly in the sun without having a protective layer of sunscreen. You might feel a tingling sensation, but that isn’t for long. Also, now that the unwanted layer of dead skin is gone, it is time for you to introduce a new skincare regime that seeps into the skin and gives you a more dramatic result. Just make sure you don’t exfoliate your skin with a scrubber!
To know all about the after-effects of Microdermabrasion, check out the blog.
Summing up I’d say, always staying busy for work calls for a great skincare routine every now and then. However, many of us cannot afford to waste time even when it is to spoil ourselves due to a tight schedule. Clearing dead skin cells off of your face is not only essential for soothing skin, but it can also prevent acne build-up and other skin conditions. Therefore the blog defining microdermabrasion vs chemical peel will help you choose the best skincare procedure to get a glowy skin within minutes!